B345 -Dimple Key Bitting / Barrel Pinholes Drilling (3 directions)
Technical data
- Control System: HMI and PLC/PC
- Screen Display: machine commands, error codes, trouble shooting guide, and production statistics
- Machine Size (approx.): 120 cm x 130 cm x 200 cm
- Machine Weight (approx.): 800 kg
- Power Supply: 220V / 3Ø
- Air Supply: 6 bar
- Cycle Time: 15 sec/ 1 part
Products
Dimple key bitting machines drill the required code dimples into all sides of the key blade. A single spindle attached to an XYZ servo system machines the dimples to the correct depths and in the proper locations. The key blank is held in a servo controlled rotating nest to rotate the key as needed. An operator manually loads the keys.
